Repairs To Upvc Windows: 11 Thing You re Forgetting To Do

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not rot or rust like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home, and could even be fatal. It is important to ensure that your windows are in good working order.

For single pane windows it is relatively easy to replace them, and the new window will generally fit within the old frame very easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the old panes. In this situation it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

If you are going to attempt to remove the window panes by yourself it is crucial to wear appropriate safety gear such as gloves that are thick and eye protection. You should also lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor, where they could be trampled under.

After the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and repair the window. This also serves as an obstacle to stop intruders from making their way into your home. If the gap is particularly large, you might be interested in the security door with an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time they may be afflicted by a variety of issues, including sagging. A sagging window in uPVC can cause problems with light, draughts and even security. It's important to take action immediately if you notice your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sliding. To accomplish this, you'll need to open the window so that you can get to the frame. With a screwdriver, you can remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you have moved your hinges. If you're satisfied with the fit of your window, tighten the screws to secure them in place.

If you cannot reposition the hinges, you could need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to loosen. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows are watertight and draught-proof.

uPVC handles may also become loose. This is often caused by screws that have become undone over time, but it can be due to the mechanism of the handle wears out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. The first step is to close the window and then perform a test fit. The corner joints of the sash should align with the casing joint. If it isn't, you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it's crucial to take action. The leaks of water from windows do not only lead to the degradation of your home's structure but also hamper your efforts to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant around the frame is damaged or not present.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how serious the issue is, the old caulking may need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and reduce your energy efficiency.

Verify that the drainage holes have no debris inside them and ensure that the sill pan has been properly angled to drain away from the window. In more extreme instances, you may need to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to note that if the leak is coming from between the glass of your double glazed window repairs glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it blows open with the breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. It's easy to replace a hinge on a window however it is simpler if you have someone to help hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window repair near me should be opened.

The problem can be caused due to opening the window in the wrong way or a faulty installation in the factory. This issue can be fixed by sending us a picture through our website and we will be happy to give you suggestions.

It is also important to grease the hinges on a regular basis. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. This is recommended to be done at least every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. First, the hinges because of wear and tear, can become misaligned, this can cause a gap to form between the sash and the frame. This can be easily repaired by giving them good cleaning, but if they are beyond repair it might be necessary to get them aligned or replaced. The interlock may be disaligned. It is located on the hinge's side and could require to be cleaned. In certain instances it is possible to replace these.

These seals can wear down or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures and decrease the risk of draughts.

Lastly, one of the most effective ways to reduce draughts is by using a draught excluder, these are typically made of fabric filled with some type of filler. They can be positioned on top of your windowsill. They will help keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repairs, your upvc windows will continue to provide excellent security and insulation for your home. It is crucial to recognise that windows last for a certain period of time and eventually, they will reach a point where it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your upvc window you should consult a professional immediately.