17 Reasons To Not Ignore Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to rust or rot.

It is important to clean and oil UPVC doors and windows on a regular basis. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, making it extremely dangerous and possibly fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good repair.

Single-pane windows are relatively simple to replace, and they generally fit into frames that were previously in use very easily. However, if windows with double panes are secured by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this case, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor, where they could be trampled under.

It's a great idea seal the gap after the glass is removed. This will keep water and drafts from entering your home until a professional arrives to repair the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the distance between the window and the door is significant, you may prefer security screens that has a window. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. In time, they could be affected by a variety of issues that include sliding. A sagging window in uPVC can cause problems with light, draughts, and even security. It's crucial to act immediately if you discover that your uPVC windows are sagging.

Repositioning the hinges can aid in fixing a window which is sliding. To do this, you'll have to open the window so that you can access the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you're happy with the fit, tighten the screws to ensure that they remain in the right place.

If you aren't able to move the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and draught-proof.

uPVC handles may also loosen up. Most often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need to shut the window and then perform a test fitting. The corners of the sash must be aligned with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

It is essential to take action if you awake each day to discover mouldy walls and floors that are wet. Water leaks from windows not only lead to the degradation of your home's structure but also hamper your efforts to control the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on the severity of the problem the caulking used previously may need to be removed before a new layer is applied. It is important to keep in mind that when it comes to upvc window repairs (click through the next page) you should not be tempted to apply too much caulk and then make the area harder to clean and reduce your energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more extreme instances, you may need to replace the window repair.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely that the problem is with the seal rather than the frame. It is also possible to be repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or if it blows open with a breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like all mechanical parts hinges are prone to wear out over time. It is essentially a simple procedure, but it is easier to do if you have someone to help hold the frame in place.

Check that the uPVC hinges are open and closed in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window a certain way or by inadequate installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are more than happy to give assistance.

It is also crucial to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the chance of windows sticking and help prevent corrosion. This should be done at least once a year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different things. The hinges can also be disaligned as a result of wear, creating an opening between the frame and sash. If they're beyond repair, it may be necessary to have them realigned. The second is the interlock, which is on the hinge side of the window, may also be misaligned, and again it's possible to give them a good clean, but in some instances it could be necessary to have these replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. Installing high-quality weatherstripping can help keep draughts at bay. Replace the upvc windows with low-emissivity glass. This will help control indoor temperatures and decrease draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. These will help to keep cold air out and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security to your home with regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and there may come an point at which it is more economical to replace them than fix them. So, if you're experiencing problems with your upvc windows, it is recommended to seek help from a professional immediately.