Ten Things You Should Not Share On Twitter
Locked Keys in car lockout service? Here's How to Open Your Car Without Damage
If you've locked your keys in your car, don't be afraid. There are numerous tricks you can try before calling a locksmith or a roadside assistance service.
For instance, you could make use of a shoelace that has the slip knot to pull up an old post lock or a wire coat hanger that you untwist and mold into hook. You can also make use of an inflatable wedge or door wedge.
Pump Wedge
If you've been stuck in a car locked up and none of the DIY options like shoestrings, wire hangers or wedges work for you, it's time to contact a professional. A locksmith or repo service provider may have specialized lockout equipment that can help you unlock your car without damaging it.
If they do, make sure you are using them correctly. Know where to place the wedge tool. Many people make the mistake of placing the wedge in the upper corner of the door, which is where it is the most susceptible to being damaged. This is a mistake because you're likely to damage the weather stripping as well as the wires inside the door. Instead, put the wedge in the most extensive portion of the gap that you can see and in the area where it will have maximum leverage.
The Pump Wedge is a premium inflatable wedge that is made of heavy duty non-marring vinyl material. It slides between the vehicle door and the door frame and is pumped up to create a separation that allows you to slide in other tools, such as an extended reach car opening (the original source) tool rod. It comes with a hook at one end that you could make into a shape to hold the latch on the door handle.
This can be done using two wooden door stops. You can place them in the back of the car door to open the gap wide enough to allow a rod. You can also try the slim jim that is a thin metal strip that can be bent into a hook to latch on the lock and pull it up. This method is not for the faint-hearted as you must be careful not tear the weather stripping on your door.
A shoelace is a different option, but it works only with older cars that do not have a push button for the unlock keys in car mechanism. You can tie a knot in the middle, and then move the lace up and down the door seam until you locate the latch. Then move the lace upwards and down until it is able to catch onto the lock. Tighten the slip knot and pull it upwards. This is a more difficult method and could scratch the paint on the door or scratch the trim if you are not careful.
Inflatable Wedge
You can easily unlock your car by using an inflatable wedge-shaped door opener. This will spare you from having to use prying tools or slim jims. The wedges can be positioned between the window and frame of the car. They will, when inflated, provide a wide space to place a tool that has a long reach like a button grabper or slim jim. This method is much safer than using a screwdriver and is a viable option even when you don't have access to the screwdriver.
A coat hanger that is wired into a hook is another way to unlock a car without damaging the exterior or interior. It can be used to grasp the lock and could be more effective than a flat screwdriver since it is less likely to cause damage to the paint on the car. However, you must examine all doors to ensure that there isn't another way to gain entry.
You can also try using a plastic bag that has been bent into a v-shaped or noose-like shape, but you'll have to be careful not to tear it, because this could make the situation worse. This method is particularly efficient if you're struggling to locate the button to lock it. It may not be as secure as using the wedge or a metal coat hanger but it could be useful when you're in an uneasy situation.
Keep calm and put safety first. There are many options to deal with this issue. If you've read this article, you'll be prepared for any scenario that might arise. You can unlock your vehicle by following our instructions. This will avoid unnecessary stress and damage. And of course, if you can, always be certain what to do when locked out of car have your keys before you leave your car.
Shoelace
Getting locked out of your vehicle is one of those "oh crap" moments that can ruin your day. In the event of an emergency it's a good idea keep a few things in your possession that can help you unlock your vehicle without damaging the windows. These items are easily accessible and will help you save money on a locksmith or the time required to call roadside assistance.
A shoelace, or even twine, is a great tool for unlocking the car. It's simple to use and will work on a variety of vehicles. This method only works on vehicles with post locks. They are stacked vertically on the window sill and are easily accessible from outside of the car. Make use of a shoelace and a slip knot to accomplish the task. Then, slide the shoelace into the gap between door and window frame. Once the slip knot is put in place, pull the two ends of the string upwards to lasso it.
This method is only applicable on older models with a hooked lock. If you have a screwdriver handy to use, you can use it to unlock the door more forcefully. You can also use a pole that you can take from a nearby object like the door frame, or an object of wood to put into the window frame. This will make room for a rod to push the lock's interior button.
Although the above strategies are relatively safe for most drivers, it's advisable to get help whenever possible. This will help prevent further damage to the car door open and decrease the chance of an accident caused by stress. If you don't have a cell phone or are unable to call for help It is crucial to inform trusted family members and friends know where your vehicle is parked. In addition, a spare set of keys can be stored in an easily accessible location on the vehicle so you can retrieve them if required.
Wire Hanger
There is no doubt that locking your keys in the car can be a very frustrating situation. The trick is to remain calm and think about all your options logically. You will avoid making the situation more difficult if you don't get caught up in panic.
One of the best options is to utilize a modified coat hanger to get back into your vehicle. You'll have to unravel the coat hanger so that it has a straight end and a hook that you can use to move the lock rod inside of your door. When you are able to reach the lock rod you should be able pull it up to open the door.
You can also make use of rods, or a metal piece from your car. It is crucial to make sure you don't cause harm to the vehicle during the process and it is best to do it without having to take the car apart. You should also try to be as patient as you can since this method is likely to work better on older cars than on modern ones, however it can still be utilized if you have a model that has a unique exterior door handle design.
You can perform similar things using the shoestring tied in a slip knot. It can also be used for a post lock however it is somewhat more difficult to maneuver because you'll be relying on the tension of the string to hold the lock. The best way to do this is by threading the shoestring through a tiny hole that you can create in the weatherstripping on the door of your vehicle. After the string is in you can pull it tightly to create a loop which will wrap around the lock and allow you to remove it. If you are lucky, the lock will be in the right place.